New: John Wick Pinball Mods

Products by PinWoofer

PinWoofer Bass Boost Unit

$ 70.00 USD

The BBU is available for all PinWoofer Amplifier models (please see amplifier identification image). The BBU provides Bass Volume and Bass Frequency Cutoff controls at the coin door location.

Aside from the features, there are two additional considerations.

First, add more input signal to the external and it will get louder. A speaker tap routed to the popular PSW10 or equivalent may not provide a strong signal so this gadget can potentially improve that and give you more intensity / better utilize the power of the external.

Second, bass quality. The BBU roll-off is quite steep (~35dB / decade above ωc) so the result is some filtering of unwanted high bass that might otherwise originate from a speaker tap, of which the input filtering of the external sub is likely not able to fully remove. So, the BBU provides an additional screening out of unwanted higher bass frequencies so it should not be surprising that the result is a "purification" so to speak, of the bass signal provided to the external and less energy is wasted on the high bass area.

Maximum boost ~8dB (~2.5x).

Cutoff frequency is adjustable ~50-173Hz @ -3dB ωc.

Frequency roll-off ~35dB/Decade.

Includes i) PinWooferTM BBU Board, ii) one 3ft 3.5mm Male to Male TRS Cable, ii) 3ft Power Cable, iv) 12ft 3.5mm TRS Male Stereo to RCA Male Stereo Subwoofer Cable and v) Adhesive Double Sticky Mounting Pad.

To start, run your subwoofer controls at max, and select 180 degree phase shift.  Run the BBU controls on the low side when starting adjustments.  

Never overdrive the input to your external device.


Install Instructions: View
Select Style

PinWoofer Bass Boost Unit - GT is made to order.

Key product features

Rewards Discount: Ineligible
Made to Order: Yes
Install Instructions: View

Returns

First of all, you wouldn't be looking at this page if you hadn't already purchased something- so thank you for your order! And we get it. Returns happen. Here is how we work returns and exchanges. We will*:

  • Happily issue you a refund for the cost of the item (minus return shipping) if you change your mind or if you ordered the wrong item within 45 days of receiving it
  • Gladly exchange an item if you find it to be defective
  • Absolutely replace items damaged during shipment but PLEASE do not discard its original packaging! And PLEASE do not attempt repair as often this can cause more issues!

In all of the above cases, please email us or use our contact form to initiate your return. Please include the following information in the request for return/exchange:

  1. Order name and order number
  2. Item(s) you are seeking to return
  3. In the case of damage or defect, please include a photo of the item 

Once your return is received, your refund or exchange will be processed, and a credit (if applicable) will automatically be applied to your credit card or original method of payment.

Our products are built to last however breakage of some parts can occur during gameplay. We guarantee our products against breakage due to design or workmanship.

 

*Please note: we sell products from many different manufacturers and who each have their own return and refund policies. Please contact us prior to purchase if you have questions about a return.

PinWoofer

PinWoofer Bass Boost Unit

$ 70.00 USD

The BBU is available for all PinWoofer Amplifier models (please see amplifier identification image). The BBU provides Bass Volume and Bass Frequency Cutoff controls at the coin door location.

Aside from the features, there are two additional considerations.

First, add more input signal to the external and it will get louder. A speaker tap routed to the popular PSW10 or equivalent may not provide a strong signal so this gadget can potentially improve that and give you more intensity / better utilize the power of the external.

Second, bass quality. The BBU roll-off is quite steep (~35dB / decade above ωc) so the result is some filtering of unwanted high bass that might otherwise originate from a speaker tap, of which the input filtering of the external sub is likely not able to fully remove. So, the BBU provides an additional screening out of unwanted higher bass frequencies so it should not be surprising that the result is a "purification" so to speak, of the bass signal provided to the external and less energy is wasted on the high bass area.

Maximum boost ~8dB (~2.5x).

Cutoff frequency is adjustable ~50-173Hz @ -3dB ωc.

Frequency roll-off ~35dB/Decade.

Includes i) PinWooferTM BBU Board, ii) one 3ft 3.5mm Male to Male TRS Cable, ii) 3ft Power Cable, iv) 12ft 3.5mm TRS Male Stereo to RCA Male Stereo Subwoofer Cable and v) Adhesive Double Sticky Mounting Pad.

To start, run your subwoofer controls at max, and select 180 degree phase shift.  Run the BBU controls on the low side when starting adjustments.  

Never overdrive the input to your external device.


Style

  • GT
  • GTP
  • KOP
View product