Products by Open Pinball Project

Open Pinball Project Solenoid Plank

$ 5.00 USD

Available for the ultimate DIY pinball project- the Open Pinball Project Solenoid Plank Board! Combines two solenoid wing boards with an interface wing in a single board. Makes OPP boards easier to mount (includes four mounting holes) and eliminates the need to add extra wires between the interface board and power and ground on the processor.  Can be used on either side of the processor board (but interface portion will not be used if in wing positions 2/3).  Provides extra space to make MOSFETs more accessible.  A single 12 pin Molex connector is used instead of two 6-pin connectors for high current wiring and a single 8 pin header is used for the direct inputs to simplify wiring. The plank supports eight solenoids and eight direct inputs.

Check out this great Wiki for a description of the Open Pinball Project!

Questions about this product or necessary parts? Visit Open Pinball Project or see their Kickstarter for more information.

Key product features

Rewards Discount: Ineligible

Returns

First of all, you wouldn't be looking at this page if you hadn't already purchased something- so thank you for your order! And we get it. Returns happen. Here is how we work returns and exchanges. We will*:

  • Happily issue you a refund for the cost of the item (minus return shipping) if you change your mind or if you ordered the wrong item within 45 days of receiving it
  • Gladly exchange an item if you find it to be defective
  • Absolutely replace items damaged during shipment but PLEASE do not discard its original packaging! And PLEASE do not attempt repair as often this can cause more issues!

In all of the above cases, please email us or use our contact form to initiate your return. Please include the following information in the request for return/exchange:

  1. Order name and order number
  2. Item(s) you are seeking to return
  3. In the case of damage or defect, please include a photo of the item 

Once your return is received, your refund or exchange will be processed, and a credit (if applicable) will automatically be applied to your credit card or original method of payment.

Our products are built to last however breakage of some parts can occur during gameplay. We guarantee our products against breakage due to design or workmanship.

 

*Please note: we sell products from many different manufacturers and who each have their own return and refund policies. Please contact us prior to purchase if you have questions about a return.

Open Pinball Project

Open Pinball Project Solenoid Plank

$ 5.00 USD

Available for the ultimate DIY pinball project- the Open Pinball Project Solenoid Plank Board! Combines two solenoid wing boards with an interface wing in a single board. Makes OPP boards easier to mount (includes four mounting holes) and eliminates the need to add extra wires between the interface board and power and ground on the processor.  Can be used on either side of the processor board (but interface portion will not be used if in wing positions 2/3).  Provides extra space to make MOSFETs more accessible.  A single 12 pin Molex connector is used instead of two 6-pin connectors for high current wiring and a single 8 pin header is used for the direct inputs to simplify wiring. The plank supports eight solenoids and eight direct inputs.

Check out this great Wiki for a description of the Open Pinball Project!

Questions about this product or necessary parts? Visit Open Pinball Project or see their Kickstarter for more information.

View product